Monroe standby generators: site review, fees and the gas-meter increase

Monroe’s standby-generator instructions require more than equipment installation before the City releases a gas-meter increase to Atmos: all inspections must be finished and the permit complete. Site review comes earlier, and the document names both electrical and building permits. Ask the City how those applications fit your project before buying equipment. City generator requirements

Start with the location drawing

The currently linked City sheet is explicitly revised October 2024. It asks for a property survey with a sketch of the generator, setbacks from structures and property lines, and distances to openings. Generator specifications, liability-insurance proof and copies of the contractor’s state and occupational licenses are also listed. One-page requirements

For proposal comparison, ask each installer to mark the proposed unit and exhaust on the same survey. A dimension to a property line answers a different question from a dimension to an opening. Have the qualified designer address the sheet’s full clearance, foundation and carbon-monoxide-detection requirements; a marketing picture or LSL checklist cannot establish a safe installation.

The document’s heading says these are prerequisites for an Electrical Permit, while its site-inspection line says the inspection precedes a Building Permit. Do not silently turn those names into one approval. Send the City the proposed scope and ask which application, site inspection and trade permits it requires. The permitting office lists monroe.inspections@ci.monroe.la.us and links the current portal and generator document.

Identify the drawing responsibility before comparing prices

LSL separates the sheet’s engineering triggers by the quantity being measured:

These are service-capacity thresholds for designed and stamped drawings, not generator-shopping recommendations. “Over” does not mean “equal to,” and falling below a listed trigger is not an exemption from other City review. Have the contractor or designer identify the relevant service values. Drawing requirements

Keep the $280 calculation in its proper place

The sheet lists a $30 generator permit fee and $250 residential CBO plan-review fee. LSL’s calculation is simply $30 + $250 = $280. The separate $300 commercial review amount is not part of this residential example. Published inputs

This is neither an installed price nor a verified complete permit bill. Ask the City which additional building or trade charges apply and ask the installer to separate equipment, design, electrical/fuel work, utility work, excavation and restoration. Confirm that the old sheet’s amounts remain applicable before budgeting.

Digging and the meter increase are separate handoffs

For excavation, use Louisiana 811’s homeowner guidance. The old One Call address now redirects to Louisiana811.com. Its guidance explains that a locate request notifies member operators; private service lines and some nonmember facilities may remain unmarked. No marks is not clearance to dig, and a City permit is not a locate response.

After installation, the City sheet requires completed inspections and a complete permit before releasing the meter increase to Atmos. Ask whether that specific release has been sent and what the utility still needs. This is not evidence of startup, a completed utility appointment or permission to operate equipment yourself.

This page incorporates LSL’s former generator gas-release guide. On September 13, 2026, LSL read the complete one-page City sheet, verified its current office-page link and checked the current 811 route. We preserved the limited fee calculation and replaced duplicate record lists with the drawing-responsibility comparison. No site, design, contractor credential, utility account or installation was inspected.